注射成型中塑料熔体充填流动的粘度模型研究

对比研究了Cross_Exp 和Cross_WLF两种粘度模型 ,并分别利用这两种模型通过实例模拟研究了熔体粘度的压力依赖性对注射压力模拟的影响     

瓦斯燃烧器回流区测试

燃烧器流场内回流区的大小和形状决定了燃烧火焰的稳定性 ,利用APV激光测速系统 ,在燃烧器冷态测试实验装置上对一瓦斯燃烧器冷态模型的流动进行了研究 ,发现了该燃烧器流场内的双回流区结构 ,并得到了中心回流区尺寸与稳焰器结构的关系 ,为该结构类型燃烧器的稳焰设计及稳焰能力的评价提供了实验依据     

CADRE: An Asynchronous Embedded DSP for Mobile Phone Applications

Asynchronous design techniques have a number of compelling features that make them suited for complex system on chip designs. However, it is necessary to develop practical and efficient design techniques to overcome the present shortage of commercial design tools. This paper describes the development of CADRE (Configurable Asynchronous DSP for Reduced Energy), a 750K transistor, high performance, low-power digital signal processor IP block intended for digital mobile phone chipsets. A short time period was available for the project, and so a methodology was developed that allowed high-level simulation of the design at the earliest possible stage within the conventional schematic entry environment and simulation tools used for later circuit-level performance and power consumption assessment. Initial modeling was based on C behavioral models of the various data and control components, with the many asynchronous control circuits required automatically generated from their specifications. This has enabled design options to be explored and unusual features of the design, such as the Register Bank which is designed to exploit data access patterns, are presented along with the power and performance results of the processor as a whole.     

超低密度早强水泥浆在天然气井固井中的应用

在天然气井固井中,上部固井质量一直存在问题。为了提高固井质量,达到保护套管的目的,研制了新型水泥浆体系。经室内研究,选择了减轻剂的种类与粒级配比;根据低密度水泥浆的性能要求,确定了配方,并对该配方进行了触变防漏特性及稳定性分析,形成了具有体系稳定、水泥浆密度波动对水泥浆体系产生影响较小、抗漏失能力强、早期强度发展快等特点的超低密度水泥浆体系。经现场试验,获得了较好的效果。     

ˮ�ཬ������������Ƽ�����Ľ�������о�

解决注水泥作业的防气窜问题，是提高固井质量，保护油气层的关键技术。现有预测和防止水泥浆气管理的方法虽然较多，但应用于现场却有一定困难，主要表现在所考虑的因素比较单一，有些高温、高压下的水泥浆性能参数难以测定。文章在分析国内外预测和防止气窜方法的基础上，应用水泥浆浆体在环空的组成，GFP系数、水泥浆稠度阻力系数（A）及多凝水泥和环空加压等措施，拟定出一套提高水泥浆顶替效率，保证水泥浆动态和静态过程压力平衡关系的具体设计方法。     

The boundary contour method for two-dimensional Stokes flow and incompressible elastic materials

 A variant of the boundary element method, called the boundary contour method (BCM), offers a further reduction in dimensionality. Consequently, boundary contour analysis of two-dimensional (2-D) problems does not require any numerical integration at all. While the method has enjoyed many successful applications in linear elasticity, the above advantage has not been exploited for Stokes flow problems and incompressible media. In order to extend the BCM to these materials, this paper presents a development of the method based on the equations of Stokes flow and its 2-D kernel tensors. Potential functions are derived for quadratic boundary elements. Numerical solutions for some well-known examples are compared with the analytical ones to validate the development. Received 28 August 2001 / Accepted 15 January 2002     

涡流管类比逆流换热器方法的研究

结合Scheper，Lewins和Bejan的理论模型，对涡流管类比逆流换热器模型进行了深入地分析，得出了冷流分量对温度分离效应的函数关系式，为了解涡流管机理和实验中强化涡流管温度分离效应提供了理论依据。     

正交曲线坐标下三维代数应力通量模型

针对弯曲及不规则明渠的水动力及物质输运特性，本文建立了曲线坐标系下的三维代数应力通量数学模型，对平面上弯曲及不规则复杂边界情形，采用Poisson方程进行正交曲线坐标变换，各向异性的湍流代数应力通量模型被引用于本文的模拟计算中，以体现复杂边界条件引起的水动力及物质输运特性的变化。通过180度强弯曲明渠水槽及贵溪电厂不规则边界河段物理模型试验两个实例计算表明，实测值与计算吻合良好，效果令人满意。     

关于混联梯级水电站经济调度的研究

提出采用具有附加线性约束的网络规划法，可把混联梯级水电站分解为几个子网络，简化了每个子网络的求解计算，从而加速大电网复杂的经济调度的计算速度。     

改进渣浆泵过流件铸造工艺及硬度的措施

介绍了渣浆泵过流件材质的化学成分及其正交试验的优选过程，以及重新制定的铸造工艺。